Mobil SHC Pegasus™ 30 is a new category of advanced technology natural gas engine oil designed to provide today's high output, low-emission four-cycle gas engines with the highest levels of protection. Mobil SHC Pegasus 30 uses a patented combination of high quality base stocks and advanced additive technology to deliver exceptional oxidation stability, nitration resistance and thermal stability. Its formulation has been carefully balanced to provide outstanding anti-wear characteristics and to control the formation of carbon and varnish deposits.
*Energy efficiency explained
The energy efficiency design is a trademark of Exxon Mobil Corporation. The fuel efficiency of Mobil SHC Pegasus 30 relates solely to the fluid performance when compared to ExxonMobil's standard SAE 40 natural gas engine oils. The technology used in Mobil SHC Pegasus 30 demonstrated up to a 1.5% increase in fuel efficiency when tested in standard natural gas engine applications under controlled conditions. The energy efficiency claim for this product is based on test performed in accordance with all applicable industry standards and protocols. Efficiency improvements will vary based on operating conditions.
Our Mobil SHC Pegasus™ Series gas engine oils provide maximum protection for high-output, low-emission four-cycle gas engines while also helping to increase fuel efficiency and reduce CO2 emissions. They are formulated for heavily loaded valve train components, pistons, liners, bearings and gear trains.
Proven to increase efficiency up to 1.5 percent*, these lubricants can also:
- Reduce the formation of carbon and varnish deposits
- Minimize oil consumption
- Maintain engine cleanliness during extended drain intervals
- Lower operating and maintenance costs
-
Formulated to potentially help limit fuel consumption
-
Promotes engine efficiency and reliability by helping control deposits in combustion chamber and piston ring zone
-
Up to 1.5% increase in fuel efficiency compared to standard natural gas engine oils*
-
Helps maximize engine availability through long drain intervals — more than 50,000 hours documented
Add up your savings
Use our calculator tools to estimate your operation’s potential savings for upgrading your conventional lubricant to Mobil SHC™ oil or grease. Then contact an ExxonMobil engineer or authorized dealer to further refine your estimate.
Data sheets
Product information
Features and Benefits
|
Features |
Advantages and Potential Benefits |
|
Outstanding anti-wear characteristics |
Help to protect heavily loaded valve train components, pistons, liners, bearings, and gear trains |
|
Excellent detergent-dispersant system |
Controls the formation of carbon and varnish deposits to minimize oil consumption and maintain engine cleanliness even during extend drain intervals |
|
Exceptional oxidation stability, nitration resistance and thermal stability |
Provides the opportunity to extend drain intervals by four to eight times that of conventional gas engine oils |
|
Low volatility |
Reduces oil consumption and reduces deposit formation |
Applications
Turbocharged, naturally aspirated, medium to high speed four-cycle engines requiring a low ash oil
Lean-burn and stoichiometric four-cycle engines operating under high load, high temperature conditions
High-speed four-cycle gas engines used in cogeneration applications
Natural gas fuelled engines equipped with catalytic converters
Gas engines operating on fuel that contains low levels of H2S
Specifications and Approvals
|
This product has the following approvals: |
|
INNIO Waukesha Engine APG 1000 Applications Using Commercial Quality Natural Gas |
Properties and Specifications
|
Property |
|
|
Grade |
SAE 30 |
|
Density @ 15.6 C, g/cm3, ASTM D4052 |
0.842 |
|
Ash, Sulfated, mass%, ASTM D874 |
0.54 |
|
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
260 |
|
Total Base Number, mgKOH/g, ASTM D2896 |
6.5 |
|
Viscosity Index, ASTM D2270 |
154 |
|
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
10.1 |
|
Pour Point, °C, ASTM D97 |
-54 |
|
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
60 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
- Energy efficient
- Enhanced wear protection
- Extended life
- Keep clean
- Severe operating conditions
- Gas engine oils - by sulfated ash
- Gas engine oils - by OEM
Technical resources
-
5W-30 oil reduces Maintenance Downtime | Mobil™ IndustrialLearn how pairing Mobil Serv Lubricant Analysis and Mobil Delvac 1 can help customers save on both time and money.
Success stories